Random good picture Not show

61. Thimbleful OMMT could increase the toughness and intensity of the lignin-based epoxy resin.

62. The test result indicates that this epoxy resin material has a better mechanical relaxation behavior under a lower temperature condition.

63. Polyamides were widely used due to the flexibility of cross-linked polymers of epoxy resin cured with them.

64. A structure of the toughener contains a flexible segment and an active epoxy group, so the toughener has excellent toughening effect on the powdered epoxy resin.

65. LED is the heart of a semiconductor chip, the chip is attached to one end of a stent, is the negative side, the other end of the power of the cathode, the entire chip package to be epoxy resin.

66. Epoxy resin is a common kind of electric material which has excellent mechanical and dielectric properties.

67. dry-type transformers are completely nonflammable, using organic material such as epoxy resin.

68. With adding liquid CTBN rubber in epoxy resin matrix, the toughness of epoxy resin matrix could be increased, and the adhesivity between epoxy resin matrix and steel-ball could be improved.

69. Body: The body is kept afloat by a material called syntactic foam, which consists of billions of tiny air-filled glass spheres embedded in an epoxy resin, like hardened Styrofoam.

70. Nylon 66 was effectively toughened with potassium titanate whiskers which were surface modified with an elastic epoxy resin.

71. At present, alkyd, epoxy resin, polyurethane resin, acrylate and varieties of their modified resins are better domestic resins for waterborne coatings.

72. Therefore, if we want to improve the dosing quality of the vacuum epoxy resin dosing machine, we must improve the characteristic of measuring-valve.

73. It is significance to study and exploit epoxy resin composite with excellent arc resistance and dielectric properties.

74. In this paper, the effects of hydroxy-terminated butadiene-acrylonitrile copolymer(HTBN) on the toughness of epoxy resin were investigated.

75. Two-component polyurethane silicone rubber polysulfide rubber chloroprene rubber and epoxy resin sealant of this type are generally completed at room temperature vulcanization.

76. The linear heating apparatus formed by resistance wire was designed to investigate the formation of the microstructures of the cured epoxy resin.

77. In this paper, the novel photosensitive prepolymers were synthesized by the block copolycondensation of unsaturated polyester with epoxy resin.

78. According to the molecule design, a kind of modified resin which have both epoxy groups and hydrophilic groups was synthesized from polyfunctional group novolac epoxy resin (F-51) and diethanolamine.

79. Cyanate reacted with epoxy resin to produce oxazolidinone, which decreased the crosslink densities and increased the toughness.

80. Very low viscosity , Unfilled clear epoxy resin impregnating material, has excellent physical and electrical properties.

81. The influence of oleoyl polyamine prepared by oleic acid and triethylene-tetramine on the properties of cured product of epoxy resin and methyhetrahydrophthalic anhydride(MTHPA)was studied.

82. Hydroxyalkyal lignin was epoxidized by epichlorohydrin catalyzed via boron trifluoride etherate to form lignin - based epoxy resin.

83. The boron-amine complex containing oxaboron heterocycle and the mechanism and kinetics of the curing reaction of epoxy resin with the complex were studied by using DSC and IR analysis techniques.

84. In this Nper(Sentencedict), N-p-carboxylphenylmaleimide(P-CPMI)was synthesized and the curing reaction of o-cresol formaldehyde epoxy resin with it as cure agent was investigated.

85. The curing mechanism of bisphenol-A diglycidyl ether type epoxy resin (DGEBA) cured with Imidazole ( IMI ) was studied by DSC, FT-IR.

86. This article introduces the requirements of aligning to the installation of gear case and construction process, calculating for sheets of epoxy resin chock for gear case on board.

87. Primary and secondary windings and iron core are insulated by epoxy resin. It has a good ability of insulation and moisture proof.

88. Secondary air tuyere: aluminum alloy shutter, the surface was electro - sprayed by epoxy resin.

89. The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).

90. The synthetic methods of modified acrylate latices with organic silicon compounds, epoxy resin, polyurethane, organic fluorine compounds were reviewed.